Gator Block Bond XP
Low VOC
Fastest setting glue in the industry
Description
Ideal for
Features
Coverage
Packaging
Description
GATOR BLOCK BOND ADHESIVE is one of the strongest polyurethane adhesives on the market. It is especially formulated for bonding concrete, natural stones, blocks, bricks and pavers. GATOR BLOCK BOND ADHESIVE is intended to provide a permanent bond to approved materials such as artificial turf. GATOR BLOCK BOND ADHESIVE can be used on dry or humid surfaces. Drying times vary depending on factors such as humidity, porosity, temperature and materials bonded together.
Ideal for
- Permanent bonding
- Overlays & pool copings
- Fast cure time
- Steps & wall caps
- Fire pits (up to 400ºF)
- Retaining walls
- Masonry units
- Stones & bricks
- Concrete pavers
- Dry & damp surfaces
- Durability
- Artificial turf
Features
- Permanent Bond in 24 hours
- Long open time – repositioning up to 30 minutes
- Works above 32°F / 0°C
- High solids – provides excellent coverage
- Non-shrinking – does not crack or lose bond
- Xtra Bond Strength (up to 3 times the strength of conventional adhesives)
- Xtra Durability against torsion and tension
- Waterproof
- VOC compliant
- Low odor
| ADHESIVE STRENGTH CHART | 24 hours | 7 days |
|---|---|---|
| Concrete to concrete | 850 PSI | 1000 PSI |
Coverage
| Format | For approximately 1/4″ bead |
|---|---|
| 10 oz (296 ml) | 28–32 lin. ft. (8.5-9.5 lin. m.) |
| 28 oz (828 ml) | 79–90 lin. ft. (24-27 lin. m.) |
Packaging
| Product | Retail Size | Per Box | Per Pallet |
|---|---|---|---|
| GATOR BLOCK BOND XP | 10 oz (296 ml) | 12 cartridges | 90 boxes |
| GATOR BLOCK BOND XP | 28 oz (828 ml) | 12 cartridges | 60 boxes |
APPLICATION INSTRUCTIONS
DIRECTIONS:
- Make sure that the surfaces you are bonding together are clean.
- Cut the spout and puncture a hole in the cartridge with a nail.
- Using a caulking gun, apply GATOR BLOCK BOND ADHESIVE on the clean surfaces. If GATOR BLOCK BOND ADHESIVE is used with GATOR XTURF, apply in a serpentine pattern over GATOR XTURF Seam Tape for XTRA performance and permanent adhesion.
- Join the two surfaces firmly, use twisting motion. GATOR BLOCK BOND ADHESIVE works at above-freezing temperatures. Material may be repositioned up to 30 minutes without losing bond strength. Moisture will shorten the open time of polyurethane adhesives. Avoid use when raining or onto standing water. Coverage: Provides approximately 30 linear feet of 1/4˝ bead.
ALLIANCE DESIGNER PRODUCTS INC. cannot guarantee results as it has no control over surface and sub-surface preparation and product application. ALLIANCE DESIGNER PRODUCTS INC. agrees that, if the product is proven to be defective, and on the condition that it was installed pursuant to the method of application of surface and sub-surface preparation described above, then ALLIANCE DESIGNER PRODUCTS INC. agrees to refund the purchase price. Proof of purchase is required for any claim. EXCLUSION OF RESPONSIBILITY THE PARTIES AGREE THAT REFUND OF THE PURCHASE PRICE AS STATED IS THE ONLY OBLIGATION OF ALLIANCE DESIGNER PRODUCTS INC. IN ALL EVENTS, ALLIANCE DESIGNER PRODUCTS INC., SHALL NOT BE LIABLE FOR ANY OTHER DAMAGES OR COSTS, DIRECT OR CONSEQUENTIAL. TO THE EXTENT PERMITTED BY LAW, ALLIANCE DESIGNER PRODUCTS INC., EXCLUDES ANY IMPLIED WARRANTY OF QUALITY, MERCHANTABILITY OR FITNESS FOR PURPOSE.